Marine outdrive removal/install stand

Description

This is a drive stand that will raise and lower to remove your outdrive or to install your outdrive so that you do not have to manhandle the drive to avoid mashing a finger or hand, pulling a back muscle or pinching a nerve in your neck or back...and of which can be painful. This stand will easily support your drive, whether it is a Mercruiser, OMC, Volvo or whatever...this will support the weight for you leaving you free to just line the drive shaft up and give the drive a little push. This stand will give you years of service which by the way, you should pull your drive at least once a year to grease the splines on the coupler and drive shaft as well as inspect and grease the u-joint. While you have the drive off, you can also check the condition of the gimbal bearing and check the baffles. Pulling the drive is not rocket science. Take off 6 nuts on a Mercruiser Bravo 1 and pull...that's it...very simple and easy. If you do need some help...call me and I would be happy to guide you thru the process.
Shipping is approximately 35 pounds in a box 25" x 30" x 34". Average shipping to the East or West coast is .00. UPS and Fed-X charge .00 to box it up as they will not ship it unless boxed. The shipping charges E-Bay shows is a JOKE and absolutely NOT correct.
Returns accepted if unused.