Krautkramer GE MIC-10 Portable Hardness Tester (No Cable or Probe) Unit only

Description

Krautkramer MIC 10 Hardness Tester (unit only, no probe or cable).
What this small instrument can do.
By pressing a key, you can display your reading as a single value or as the active arithmetical average value of a hardness measurement set. Editing of erroneous single values, without having to interrupt the measurement set, is just as simple. Adjustable alarm thresholds show you critical measurement values both visually and with audiable alarms. The calibration parameters for measurements on low and non-alloyed steel are preprogrammed into the MIC10; however, the instrument can be easily and quickly recalibrated to other materials.Instrument operation can be customized for specific testing requirements: unnecessary functions can be inhibited, e.g. various hardness scales or the recalibration capability. This reduces key presses and simplifies operation.
The small, handy MIC 10 makes life easy for you: a hardness tester that you can take anywhere - on scaffolds for testing large containers and pipes, or for testing components at any location. The small narrow probes (Available Online MIC201, MIC205, and MIC2010) even enable you to make measurements on positions difficult to access, such as tooth flanks or roots of gears.You can measure in any direction, e.g. in the horizontal or overhead positions. The instrument carrier and prop-up stand permits two hand operation, for correct probe positioning and guidance.
Range: 20 - 1740 HV
Conversion: HV, HB, HRC, HRB N/mm² (only with the 10 kgf handheld probe) according to DIN 50150, ASTM E 140
Display: 4 digit LCD with switchable backlight
Weight:approx. 300g
Dimensions:160 x 70 x 45 mm, 6.3 x 2.8 x 1.8 inches (W x H x D)
Permissible ambient temperature: In operation: -15°C to 55°C(5°F to 131°F) In storage: -20°C to 60°C (-4°F to 140°F)
Power: 2 x 1.5V AA batteries
Operational duration: Approx. 15 hours without backlight
Interface: RS232C bidirectional