AZ-EL Custom mount for Global Skyware 1.2 M. Type 123 Class II Satellite Dish

Description

We improved the original AZ-El mount that was made for the Global Skyware  1.2 meter  Type 123 Class II Satellite Dish.  Weather resistant hardware will eliminate rusty locked bolts at a later date when the dish may need realignment.
Align a Satellite Dish Faster with the Nomad
Conventional nomad azimuth elevation caps (AZ/EL Caps) are a hassle. You wrestle and wiggle to align the dish where you need it—only to have it go off kilter when you tighten down the bolts. The process to align the dish is slow, tedious, and not very accurate. The Nomad AZ/EL Cap allows you to align a satellite dish stress-free.
The Skycasters AZ/EL Cap represents a whole new way to set the azimuth and elevation. The Nomad Cap is faster and easier than any other mount, and more precise. You’ll save time on the phone with your NOC trying to set up your network while getting the azimuth and elevation just right.
Plus, you’ll be more accurate when you want to align a satellite dish. The Nomad innovations make the process to align the dish faster, easier, and more precise. Three good reasons to specify the new Skycasters AZ/EL Cap.
Very similar to the traditional azimuth and elevation cap that connects the dish to the pole or non-penetrating roof mount, the Nomad AZ/EL Cap replaces the tedious procedure of turning bolts every time an adjustment is made.
The elevation wheel is the upper wheel that adjusts the up and down motion of the dish.
The azimuth wheel is the lower wheel which adjusts the side to side motion of the dish.
Check out our other listings where this mount is used on our Nomad fold down pole mount for a Type 123 Class II 1.2 meter satellite dish.